Skip to content
DoC 150 Run-Through Tunnel Baffles. 4 mesh pieces per set.

DoC 150 Run-Through Tunnel Baffles

by PERDIX
SKU 20042-RTB
4.100 Ft - 4.100 Ft
4.100 Ft
4.100 Ft - 4.100 Ft
4.100 Ft

Build your own run-through DoC 150 approved trap tunnel using our ready-to-use wire mesh baffles. Made from 2mm steel wire and finished in an olive-drab powder coating. 4 mesh pieces per set.

Build your own run through DoC 150 trap tunnel using our ready-to-use wire mesh baffles. Made from 2mm steel wire and finished in an olive-drab powder coating. These baffles have been specially made (not cut from standard sheets of weldmesh) to meet the requirements of the UK Spring Trap Approval Orders. DoC 150 traps must be used in tunnels with a particular baffle configuration as set out in the conditions of use section. Four mesh pieces per set.

The dimensions and cut-out sizes of each mesh are as follows:

  1. Entrance mesh (L/H & R/H): 182mm (W) x 162mm (H). Cut out: 58mm (W) x 60mm (H).
  2. Internal baffle (L/H & R/H):  172mm (W) x 147mm (H). Cut out:  50mm (W) x 65mm (H).

Brand
PERDIX

Material
2mm steel mesh

Finish
Olive drab powder-coated