Skip to content
Our PERDIX DoC 200 tunnel Baffles are designed to reduce non-target captures. Laser cut 2mm steel finished off with olive drab powder coating.

Baffles for Single Entry DoC 200 Tunnel

by PERDIX
SKU 20043-B
4.100 Ft - 4.100 Ft
4.100 Ft
4.100 Ft - 4.100 Ft
4.100 Ft

Build your own blind-ended DoC 200 trap tunnel using our ready-to-use wire mesh baffles. Made from 2mm steel wire and finished in an olive-drab powder coating. 3 mesh pieces per set.

Build your own single entry DoC 200 trap tunnel using our ready-to-use wire mesh baffles. Made from 2mm steel wire and finished in an olive-drab powder coating. These baffles have been specially made (not cut from standard sheets of weldmesh) to meet the requirements of the UK Spring Trap Approval Orders. DoC 200 traps must be used in tunnels with a particular baffle configuration as set out in the conditions of use section. The dimensions and cut-out sizes of each mesh are as follows:

  1. Entrance mesh: 229mm (W) x 222mm (H). Cut out: 58mm (W) x 80mm (H).
  2. Internal baffle: 222 mm (W) x 194 mm (H). Cut out: 58mm (W) x 77mm (H).
  3. Solid mesh: 229mm (W) x 222mm (H).

Brand
PERDIX

Material
2mm steel mesh

Finish
Olive drab powder-coated