Skip to content
DoC 150 Tunnel Baffles

Baffles for Single Entry DoC 150 Tunnel

by PERDIX
SKU 20042-B
4.100 Ft - 4.100 Ft
4.100 Ft
4.100 Ft - 4.100 Ft
4.100 Ft

Build your own blind-ended DoC 150 trap tunnel using our ready-to-use wire mesh baffles. Made from 2mm steel wire and finished in an olive-drab powder coating. 3 mesh pieces per set.

Build your own blind-ended DoC 150 trap tunnel using our ready-to-use wire mesh baffles. Made from 2mm steel wire and finished in an olive-drab powder coating. These baffles have been specially made (not cut from standard sheets of weldmesh) to meet the requirements of the UK Spring Trap Approval Orders. DoC 150 traps must be used in tunnels with a particular baffle configuration as set out in the conditions of use section. Three mesh pieces per set.

The dimensions and cut-out sizes of each mesh are as follows:

  1. Entrance mesh: 182mm (W) x 162mm (H). Cut out: 58mm (H) x 58mm (W).
  2. Internal baffle: 174 mm (W) x 147 mm (H). Cut out: 58mm (H) x 60mm (W).
  3. Solid mesh: 182mm (W) x 162mm (H).

Brand
PERDIX

Material
2mm steel mesh

Finish
Olive drab powder-coated