Reconyx HL2X Hyperfire 2 Number Plate Capture Camera

From: £375.00 Ex. Vat

The Reconyx HL2X Hyperfire 2 Number Plate Capture Camera can record images of  number plates on vehicles traveling as fast as 50 miles per hour (80 km/h) day or night.


  • Build:
    • Made in USA
    • 5 year warranty
  • Illumination:
    • No glow covert IR
    • 15 m (50ft) range
  • Imagery:
    • Capture number plate images day & night
    • 720P HD video with audio
  • Activation:
    • 0.2 second trigger speed
    • 30m (100ft) PIR detection range
    • Advanced multi-scheduling
  • Power:
    • 80,000 images or 2 years battery life
  • Deployment:
    • Up to 512GB memory card capacity
    • Adjustable belt included


The Reconyx™ HL2X HyperFire 2 is the latest remote camera from Reconyx specifically designed to capture car number plates day and night.  Due to their reflective nature, number plates have always been very difficult to photograph, especially at night. The Reconyx™ HL2X HyperFire 2 uses a special filter to remove the glare and provide a clear image of the plate, day and night. With an amazing trigger speed of 0.2 seconds, it is capable of recording number plates at speeds of up to 50 mph (80 kph).

The Reconyx HL2X HyperFire 2 also features Reconyx’s new NoGlow™ GEN3 High Output Infrared night vision for  illumination up to 15m (50 feet), 720P HD Video with Audio, loop recording and Advanced Multi-Scheduling (programming the camera to only operate during set hours of the day and different days of the week). As with all Reconyx cameras, the HL2X is made in the USA from only the highest quality components.  This is backed up by a 5 year manufacturers warranty, the longest in the trail camera business. If purchased from PERDIX, official dealers of Reconyx products since 2012, we will take care of all warranty repairs at no cost.

This camera is available with the HyperFire 2 external power jack & cable upon request.

Technical Details


Model series

Launch year


Primary application

Camera size (HxWxD)

14 x 11.5 x 6.3 cm (5.5" x 4.5" x 2.5")

Weight (excluding batteries)


Housing colour

OD Green


5 years

Flash type

No glow infrared LED

Flash range

15m (50ft)

Adjustable flash power


Flash on/off option


Image resolution

720 x 2048 Wide Screen or Standard Aspect Ratio

Image detail

Colour day / Monochrome night

Frame rate

RapidFire™ to 10 seconds between images

RapidFire™ Near-Video speed

Up to 3 frames per second

Video quality

720P HD with audio

Video length per trigger - day

Up to 90 seconds

Video length per trigger - night

Up to 90 seconds

PIR video management

Day and night video

Audio on/off option


Loop recording


Image data

Time, date, temp, moon phase, camera ID

Logo on/off option


Field of View

42 degrees

Mapping & image management software

SecurityView™ Image Management & Configuration Software

PIR detection range

30m (100ft)

Trigger speed

0.2 second

Photos per trigger

1 to 10

Delay after triggering

0,5,10,15,30 sec, 1,2,3,5 min

Adjustable PIR sensitivity or range


Motion sensor scheduling

On / off and scheduled operation by day

Time-Lapse intervals

5,15,30 sec, 1,5,15,30 min, 1 hour

Time-Lapse scheduling

AM Period in hours & PM period in hours

Battery quantity / size

12 AA

Battery type

Lithium, NiMH rechargeable

Battery life

Up to 80,000 images or 2 years

Battery housing


External power jack

Optional extra

Memory card capacity

Up to 512 GB

Memory card type


PIR test


PIN / Password protection


Python cable compatible


Security case available


Mounting options included

Standard thread + adjustable belt

Operating temperature

-28° to 48° C (-20° to +120° F)

Product Instructions Manual

For further information, please click on this link to download the Reconyx HyperFire 2 instructions manual.

You may also like…