Timber Eco Shield Wood Stain
UK Mainland Only
UK Mainland Only
An advanced water-based micro-porous timber treatment using nano-technology. It creates a long lasting waterproof wood coating that is friendly to its environment.
It gives a traditional matt wood stain finish in a range of natural colours that would sit perfectly in any garden, woodland, park or agricultural land.
Ideal for:
• Timber Buildings
• Fences
• Gates
• Conservatories
• Summer Houses
• Garden Furniture
• External Timbers and Cladding
Features:
• Long-lasting protection
• Low VOC (Volatile Organic Compounds)
• Low odour
• Water repellent uses nanotechnology
• Translucent – allows wood grain to show through
• Rich long-lasting colour
• Plant child and pet friendly
• Microporous high-build coating
Coverage: 1 Litre will cover approximately 10-12m²
HOW TO CLEAN UP
Remove all excess products from the brushes or roller and wash with warm water and detergent.
Remove sprayer heads and allow to soak in soapy water before cleaning.
PRECAUTIONS
• Wear suitable protective clothing and synthetic rubber/PVC gloves when applying any wood stain.
• Do not breathe in the mist or spray, wear suitable respiratory equipment.
• Unprotected persons and animals should be kept away from coated area for 48 hours or until surfaces are completely dry.
• Remove or cover fish tanks and bowls before application.
• Keep out of reach of children.
• Wash splashes from skin and eyes immediately using plenty of water.
• Wash hands and exposed skin before meals and after use.
• Keep in original container, tightly closed and in a safe place.
PLEASE READ THE CONTAINER FULLY BEFORE USE.
Protek’s wood stain range is water-based and environmentally friendly and when used responsibly, will not injure any flora or fauna that comes into contact with it.
Finish
Matt natural stain finish
Plant, child and pet friendly
Lifespan
2 – 5 years depending on levels of wear & tear + exposure
Coats
2 coats are recommended
Coverage
Approx. 10-12m²per litre per coat. Coverage rates for 1st coat and rough-sawn timber will be at the lower end
Apply By
Brush, Roller or Low Pressure Spray Gun. Ideal for spraying large areas
Drying Time
Touch-dry in 2 hours in normal weather. Allow approx. 2 hours before applying 2nd coat if conditions are clear and dry. Drying time will be far longer in cold humid conditions. The second coat must be applied as soon as the first coat is tough dry
VOC & Odour
Low
Suitable For
Hardwood & Softwood Vertical & Horizontal surfaces
Planed & Rough-Sawn timber
Summerhouses; Gates; Shed; Fences;
Log Cabins; Furniture; Joinery & Cladding; Animal Housing
Interior wood
Metal, terracotta, stone and some plastic
Available In
125ml, 1 Litre or 5 Litre